What they are used for

Printed circuit boards are usually made of fibreglass (FR4), which due to being highly abrasive, specialist drill bits are required, especially given the many hundreds or thousands of holes on most circuit boards.

We stock PCB Carbide Micro Drills from 0.2mm through to 3mm. Our drill descriptions describe the flute diameter and the flute length. Other dimensions are standard accross the range.

0.4mm x 7mm

equates to a drill of D=0.4mm and L=7.0mm

2.4 x 10.5

equates to a drill of D=2.4mm and L=10.5mm

Please note: we stock ONLY new drills , we DO NOT offer reground bits. Though we primarily stock drills for PCB manufacture, Drills are suitable for drilling Aluminium, Brass, Bronze, Cast Iron, Copper, GRP, PCB, Stainless and Hardened Steels etc. Ideal for model engineering, electronics and jewellery making, etc.

Please note: we stock ONLY new drills , we DO NOT offer reground bits. Though we primarily stock drills for PCB manufacture, Drills are suitable for drilling Aluminium, Brass, Bronze, Cast Iron, Copper, GRP, PCB, Stainless and Hardened Steels etc. Ideal for model engineering, electronics and jewellery making, etc.

The list of available sizes

How to use

For example photos of the tool's please check our gallery by clicking the button below:

Gallery

Safety Warning, Drilling and Milling

Dust and mist created by drilling, milling and other activities may chemicals and residue from the materials and tools that could cause adverse health effects

POTENTIAL HEALTH HAZARDS

• SKIN: Dust may cause moderate skin irritation.
• EYES: Dust may cause moderate eye irritation. Fumes may irritate eyes.
• INHALATION: Fibrous glass dust may be released from the fiberglass cloth substrate when machined.

REDUCE THE RISK

Risk from these exposures varies depending on how often this type of work is performed and the amount of individual exposure. To reduce the amount of exposure to harmful chemicals and materials:

• Work in a well ventilated area
• Avoid breathing in dust or mist
• Use approved methods of dust and mist control
• Avoid prolonged skin contact with dust or mist
• Consult the power tool manual for proper use of the power tool and safety equipment requirements.
• Use approved safety and protective equipment: Gloves, shields, dust masks, protective clothing, tool guards, etc.

Feature Overview

• Carbide drill bits for extended tool life and superior drill hole quality.
• Compliant with multilayer applications.

PCB Drill Sizes Available

If you require any other colours on your tools then please contact our Sales department for further advice, using the form in the bottom of the page.

Distance rings will be placed at a the standard distance of 16.5 mm from the top of the tool, if you require the rings placed anywhere else please contact SALES after placing an order. Please return to this page and use the form in the bottom of the page.

Medium Drill 35 Deg 0.20 mm D x 5.00 mm L w/ green ring		Straight Drill 30 Deg 1.50 mm D x 10.50 mm L w/ green ring
Medium Drill 35 Deg 0.30 mm D x 7.00 mm L w/ green ring		Straight Drill 30 Deg 1.60 mm D x 10.50 mm L w/ green ring
Medium Drill 35 Deg 0.40 mm D x 7.00 mm L w/ green ring		Straight Drill 30 Deg 1.70 mm D x 10.50 mm L w/ green ring
Medium Drill 35 Deg 0.50 mm D x 8.50 mm L w/ green ring		Straight Drill 30 Deg 1.80 mm D x 10.50 mm L w/ green ring
Medium Drill 35 Deg 0.60 mm D x 8.50 mm L w/ green ring		Straight Drill 30 Deg 1.90 mm D x 10.50 mm L w/ green ring
Medium Drill 35 Deg 0.70 mm D x 10.50 mm L w/ green ring		Straight Drill 30 Deg 2.00 mm D x 10.50 mm L w/ green ring
Medium Drill 35 Deg 0.80 mm D x 10.50 mm L w/ green ring		Straight Drill 30 Deg 2.10 mm D x 10.50 mm L w/ green ring
Straight Drill 30 Deg 0.90 mm D x 10.50 mm L w/ green ring		Straight Drill 30 Deg 2.20 mm D x 10.50 mm L w/ green ring
Straight Drill 30 Deg 1.00 mm D x 10.50 mm L w/ green ring		Straight Drill 30 Deg 2.30 mm D x 10.50 mm L w/ green ring
Straight Drill 30 Deg 1.10 mm D x 10.50 mm L w/ green ring		Straight Drill 30 Deg 2.40 mm D x 10.50 mm L w/ green ring
Straight Drill 30 Deg 1.20 mm D x 10.50 mm L w/ green ring		Straight Drill 30 Deg 2.50 mm D x 10.50 mm L w/ green ring
Straight Drill 30 Deg 1.30 mm D x 10.50 mm L w/ green ring		Straight Drill 30 Deg 2.95 mm D x 10.50 mm L w/ green ring
Straight Drill 30 Deg 1.40 mm D x 10.50 mm L w/ green ring		Straight Drill 30 Deg 3.00 mm D x 10.50 mm L w/ green ring

Sales contact form Name Email address Order number (if you have) Content (eg. Standard Distance request)   Submit Form or Reset